Winter Rinse 4L #56544
For use on resilient tile and most floors (stone, terrazzo, concrete, etc.) where excess alkalinity may cause dulling or adhesion problems. Please note that use on some polished marble floors may cause etching. Test in an inconspicuous area first for any etching before treating any large area. Can be used with an auto-scrubber with Light Cleaner Red pads with vacuum on to pick up all residual solutions.
Light to moderate build-up 1:128 (1oz per gallon of water)
Heavy build-up 1:64 (2oz per gallon of water)
Damp mop floor or use auto scrubber with light cleaning red pad. If mopping, damp mop the floor a second time using clean water to remove any residue. Allow to thoroughly dry before burnishing.
Can be used in auto-scrubbersor mop-on applications
Odour – Chemical
pH – 2.0 – 3.0
Specific gravity – 1.02
Inhalation: Remove victim to fresh air. If symptoms persist, call a physician.
Skin Contact: Flush skin with plenty of water, while removing contaminated clothing. Wash contaminated clothing before reuse. Obtain medical attention.
Eye Contact: IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. Consult a doctor immediately.
Ingestion: Immediately call physician. DO NOT induce vomiting. Drink 3 to 4 glasses of water. Never give anything by mouth if victim is unconscious or convulsing.
Made in Canada.
Safety glasses are recommended. Store in a cool dry place. Keep away from incompatible material.
Refer to Material Safety Data Sheet for more information.